Second M.2 Not Showing Up

I recently installed a second M.2 SSD in my computer, but it’s not showing up in My Computer or Disk Management. I’ve tried troubleshooting with no luck.

Can anyone help?

If you’re trying to install a second M.2 SSD in your computer and it’s not showing up, don’t worry! There are a few possible reasons why this could be happening, and we’ll walk you through each one so you can get your new drive up and running in no time.

First, check to make sure that the M.2 slot on your motherboard is enabled. In most cases, it will be, but there’s a chance that it could be disabled in the BIOS if you’ve never installed an M.2 drive before. If that’s the case, simply enable the slot and save your changes before restarting your computer.

Once your computer has rebooted, check to see if the drive is now appearing in Windows Explorer or Disk Management. If it is, great! You can now format it and use it as you please.

However, if the drive still isn’t appearing, there’s a chance that it isn’t compatible with your motherboard or that the slot itself is faulty. If you suspect compatibility issues, try installing the drive in another computer (if possible) to see if it appears there. If it does, then you know it’s not a problem with the drive itself and you can focus on troubleshooting your motherboard or M.2 slot.


Second M.2 Not Showing Up in Windows

If you’re using a computer with two M.2 slots and only one is showing up in Windows, don’t worry—this is normal. Here’s what’s going on and how to fix it. The reason why only one of your M.2 slots is appearing in Windows is because the other slot is being used for storage purposes.

This means that it’s not available for use as a boot device. To fix this, you’ll need to change your BIOS settings so that both M.2 slots are visible in Windows. Here’s how to do it:

1. Enter your BIOS settings by pressing the appropriate key during startup (usually F2 or Del). 2. Navigate to the Boot tab and ensure that both M.2 slots are listed under Boot Priority Order. If not, add them in and save your changes.

Second M.2 Not Showing Up Asus

If you’re reading this, then it’s likely that you, like me, have been struggling to get the second M.2 slot on your Asus motherboard to show up. I’m here to tell you that there is hope! It is possible to get the second M.2 slot working, but it does require a bit of patience and trial-and-error.

First things first: check your BIOS version. If you’re running anything below 4004, update immediately! The latest BIOS version (4008 as of this writing) has significantly improved support for NVMe devices in the second M.2 slot.

If you’re already on 4004 or later, move on to step two. The next thing to do is make sure that both your SATA and NVMe controllers are set to AHCI mode in the BIOS. This can usually be found under the Storage tab; if you’re unsure, consult your motherboard’s manual for more detailed instructions.

Once that’s done, save your changes and reboot into Windows. Once you’ve verified that both controllers are in AHCI mode, it’s time to install any drives that you want to use in the second M.2 slot. For best results, I would recommend using an NVMe drive in the top slot and a SATA drive in the bottom slot; however, some users have reported success with using two NVMe drives simultaneously.

Your mileage may vary! Once your drives are installed and recognized by Windows, open up Device Manager and look under the Disk Drives section for any mention of an “Asmedia ASM1061 Controller.” If present, right-click on it and select “Update Driver Software.”

Navigate through the prompts until you reach a point where you can browse for driver software manually; at this point, select the option to search automatically for updated driver software and let Windows do its thing.

M.2 Showing in Bios But Not Windows

If you’ve ever come across the M.2 Showing in Bios But Not Windows error, then you know how frustrating it can be. This error can prevent your computer from being able to boot up properly, or even access the BIOS.

In this article, we’ll show you how to fix this error so that you can get back to using your PC as usual. M.2 is a type of solid-state drive (SSD) that’s designed for use with computers that support the PCI Express bus standard. These drives are usually much faster than traditional SATA-based SSDs, and they offer a number of advantages over other storage solutions.

However, some users have reported issues with M.2 drives not being recognized by their computer’s BIOS or Windows operating system. If you’re encountering this problem, there are a few things you can try to get your M.2 drive working again. First, check to make sure that the drive is properly installed in your computer and connected to the motherboard via an M keyed slot or adapter card.

If everything looks good there, try updating your BIOS or resetting it to defaults; sometimes outdated BIOS versions can cause compatibility issues with new hardware like M.2 drives . Finally , if all else fails , you may need to contact your motherboard’s manufacturer for further assistance . We hope this article has helped you resolve the M .

2 Showing in Bios But Not Windows error on your PC . If you have any other questions or comments , please feel free to leave them below .

How to Enable M.2 in Bios

If your motherboard doesn’t have an M.2 slot, you’re out of luck. You’ll need to buy a new motherboard that supports M.2 drives in order to take advantage of their speed. However, if your motherboard does have an M.2 slot, there’s a good chance that it’s disabled by default.

In order to enable it, you’ll need to head into your BIOS settings and enable the M.2 slot from there. The exact process will differ depending on your BIOS, but you should be able to find the relevant setting by looking for something like “M.2 Enable” or “M.2

Slot Enable.” Once you’ve found it, just set it to “Enabled” and save your changes.

M.2 Not Detected in Bios Gigabyte

If you have a Gigabyte motherboard and you’re trying to use an M.2 drive, you may have run into a problem where the BIOS doesn’t detect the drive. This can be frustrating, but there are a few things you can try to get it working. First, make sure that your motherboard supports M.2 drives.

Not all Gigabyte motherboards do, so if yours doesn’t, that could be the reason why it’s not being detected. If your motherboard does support M.2 drives, then the next thing to check is whether or not the drive is properly installed in the socket. If it’s not firmly seated, it won’t be detected by the BIOS.

Another possibility is that your BIOS is configured to only look for SATA devices, and not M.2 drives. In this case, you’ll need to change a setting in the BIOS to make it scan for M.2 devices as well.

Nvme Ssd Not Showing Up

If you’ve recently installed an NVME SSD and it’s not appearing in your computer, don’t panic! There are a few possible reasons why this might be happening. Here’s a quick rundown of what to check:

First, make sure that the NVME SSD is properly installed and connected. If everything looks good there, try restarting your computer. Sometimes Windows will need a reboot in order to recognize new hardware.

If the NVME SSD still isn’t showing up, open the Device Manager and look for it under the “Disk Drives” section. If it’s there but has a yellow exclamation point next to it, that means there’s a problem with the driver. Try updating the driver from the manufacturer’s website or using Windows Update.

Finally, if none of these solutions work, it’s possible that your motherboard doesn’t support NVME drives. In this case, you’ll need to either upgrade your motherboard or use a different type of SSD (such as SATA).

How to Enable M.2 in Bios Msi

If you have an MSI motherboard with an M.2 slot, you can enable M.2 in the BIOS to get the most out of your SSD. Here’s a step-by-step guide on how to do it. 1. Enter the BIOS by pressing F2 during bootup.

2. Go to the Advanced tab and select Integrated Peripherals from the menu on the left. 3. Scroll down to SATA Configuration and press Enter. 4 .

Select Enable M.2 from the SATA Mode drop-down menu . 5 . Save your changes and exit t he BIOS .

Your M .

How to Enable M.2 in Bios Gigabyte

M.2, also known as NGFF (Next Generation Form Factor) is the successor of the mSATA standard for internally mounted storage devices. M.2 is very versatile and can be used in a variety of applications such as SSDs, Wi-Fi cards, modems, and more. The main advantage of M.2 over mSATA is its higher data transfer rate which allows for faster boot times and increased performance.

To enable M.2 on your Gigabyte motherboard, follow these steps: 1) Enter the BIOS by pressing F12 at bootup. 2) Go to Advanced Mode > System Agent Configuration > SATA & RST Configuration.

3) Enable Intel Rapid Storage Technology and select RAID On under SATA Mode Selection for the drive you wish to use as your boot device. 4) Press F10 to save changes and exit BIOS Setup.

Second M.2 Not Showing Up


Why is My Second M 2 Not Showing Up?

If you’re wondering why your second M2 isn’t showing up, there are a few possible explanations. One possibility is that your motherboard doesn’t have enough PCIe lanes to support two M2 drives. In this case, you would need to use a PCIe adapter in order to connect both drives.

Another possibility is that your BIOS may not be configured correctly. Make sure that you have the latest BIOS updates and that you’ve enabled SATA ports for both M2 drives. Finally, it’s also possible that one of your M2 drives is defective.

If you’ve tried all of the above troubleshooting steps and still can’t get both drives to show up, try testing each drive individually in another system to see if they’re working properly.

How Do I Get the Second M 2 to Show Up?

Assuming you would like to add a second monitor to your computer: There are a few things you need in order to add a second monitor to your computer. You will need an extra monitor, of course, as well as a video cable that is long enough to reach from your computer to the second monitor.

It’s also important to have a video card with two video outputs – most computers only come with one output, so you may need to upgrade your video card if yours only has one. Lastly, you’ll need a way to physically mount the second monitor on or near your desk. Once you have all the necessary hardware, the next step is connecting everything together.

First, power down your computer and unplug all cables (including the power cord). Next, connect the video cable from the back of the second monitor into an available video output on your video card. Once that’s connected, plug in the power cord for the second monitor into an available outlet.

Finally, turn on both monitors and boot up your computer. If everything went according to plan, you should now see your computer’s desktop spread across both monitors. If not, double-check all of your connections and make sure that both monitors are powered on and receiving a signal from the video card.

How Do I Enable My Second M 2 Ssd?

If you have a second M.2 SSD installed in your computer, you can enable it by following these steps: 1. Enter the BIOS/UEFI menu.

This is usually done by pressing a key during bootup, such as F1, F2, F10 or DEL. Consult your motherboard manual for the exact key to press. 2. Once in the BIOS/UEFI menu, find the Storage Configuration or Boot Order section.

Again, consult your motherboard manual if you can’t find it. 3. In the Storage Configuration section, set both of your M.2 SSDs to Enabled.

If there’s an option to set one as primary and the other as secondary, make sure the one you want to use as your main drive is set as primary (this will usually be the one with Windows installed on it). 4 . Save your changes and exit from the BIOS/UEFI menu.

Your computer should now boot from both M 2 SSDs simultaneously!

Why is My Second Nvme Ssd Not Showing Up?

If you’re wondering why your second NVMe SSD isn’t showing up, there are a few possible explanations. The most likely explanation is that your computer’s BIOS simply isn’t configured to detect it. To check if this is the case, enter your BIOS settings and look for an option related to NVMe configuration.

If you don’t see any such option, it’s likely that your BIOS doesn’t support NVMe devices, in which case you’ll need to upgrade to a newer version. Another possibility is that the SSD itself is defective. To rule this out, you can try connecting it to another computer or using a different NVMe-compatible controller.

If the SSD still doesn’t show up, then it’s most likely defective and will need to be replaced. Finally, it’s also possible that there’s something wrong with the way the SSD is connected to the motherboard. Make sure that all of the cables are properly plugged in and that the SATA/NVMe ports are functioning properly.

If everything looks fine but the SSD still isn’t showing up, then try disconnecting and reconnecting it a few times just to make sure that everything is seated correctly.


If you’re having trouble getting your second M.2 drive to show up in Windows, don’t worry-you’re not alone. There are a few things that can cause this problem, but luckily there are also a few easy solutions. First, make sure that both drives are properly installed and seated in their slots.

If one of the drives is loose, it’s possible that the computer isn’t detecting it. Also, check your BIOS settings to make sure that both drives are enabled and recognized. If everything looks good on the hardware front but you still can’t see the second drive in Windows, try changing the SATA mode in your BIOS from AHCI to RAID.

This has been known to fix the problem for some people. Finally, if you’re still having no luck, it’s possible that there’s a driver issue causing the problem. In this case, you’ll need to install the latest drivers for your motherboard and chipset from the manufacturer’s website.

Leave a Comment